Thermal Imaging & Low Light Cameras

We have a range of thermal imaging, low-light cameras and dual systems that combine both. We can develop bespoke systems for onshore, coastal and offshore installation, with gyro-stablised motion compensation as required.

Imaging Benefits

  • Additional information for cetacean monitoring and migration.
  • Security
  • Safety (e.g. man over board)
  • Avoidance of hazards such as debris and fishing gear.

Night Navigator 2526

The Night Navigator™ 2526 is the most rugged, low maintenance, compact electro-optical system designed for USV, automated ships, paramilitary missions, commercial vessels and leisure craft alike. Mast-mounted payload platform, this multi-spectrum imaging system offers exceptional performance. It integrates an uncooled high-resolution thermal imager with continuous optical zoom with an HD day camera with the best low light sensitivity in a gyro-stabilized sensor platform with additional video stabilization. Controllable from the bridge of a ship or through IP network onboard and remotely, this COTS system is built to military standard.

Night Navigator 2526 - a white housing with the camera lens on the side

Key Features

  • Compact, rugged, marinized, low maintenance design
  • LWIR uncooled thermal imager with 4x continuous optical zoom for best surrounding awareness.
  • HD Day / low light camera with 30x optical zoom and 0.013Lux low light sensitivity
  • Streams H.264 (HD) video with PiP and communicates digitally over IP network (Ethernet)
  • Outputs video in dedicated coax cable to the bridge in HD-
  • Single payload with no junction boxes or interface modules simplifies installations and retrofit, while reducing maintenance.
  • Designed to withstand marine environmental conditions and proven by over 10 years and hundreds of successful operating installations worldwide.

Documentation & Support

Technical Spec

THERMAL CAMERA

  • Spectral range: 8 – 14 µm Uncooled thermal imager
  • Sensor type: LWIR
  • Resolution: 640×480 pixels
  • Field of View: 39.9⁰ to 8.3⁰ continuous optical zoom
  • Zoom: 4x continuous optical zoom & 4x digital zoom
  • Format: SDI & H.264 video streaming on IP network
  • Focal length: 15 to 75mm
  • Detection range1: NATO target to 6.8 km1 / Human to 2.8km1

DAY / LOW LIGHT CAMERA

  • Sensor type: High Definition Day CMOS
  • Resolution: HD 1080p30
  • Field of View: 63° to 2.3° FoV in HD mode
  • Zoom: 30x continuous Optical zoom + 12x Digital zoom
  • Low light sensitivity: ≤ 0.013Lux in B&W mode
  • Focus: Auto & Manual
  • Window coating: Hydrophobic

RADAR CURSOR, ARPA & AIS TARGET TRACKING

  • Radar Cursor, ARPA and AIS target tracking via NMEA0183 (RS422/RS232) through supplied NMEA 0183
  • Network Interface Box

VIDEO TRACKING OPTION

  • Video target auto scanning, detection and tracking in HD mode

CONTROLLER: HARDWARE OR GUI, IP BASED AND REMOTE-CONTROLLED SOLUTIONS

  • 1. Compact tactile controller integrating HD color display for orientation and troubleshooting. (142 x 91 x82mm)
  • 2. GUI (Graphical User Interface) SW, either on dedicated touchscreen display (Panel PC) or as pop up window in PC; with USB joystick (two button joystick or Rugged Rigid Grip)
  • 3. GUI SW integrating the video feed, for use on portable PC
  • All controllers offer Built in Test for remote diagnostic and are configured for optional additional controllers or remote control.

PAYLOAD SPECIFICATIONS (DESIGNED FOR MARINE APPLICATIONS)

  • System type: 3 axis gyro-stabilization2, c./w. enhanced video stabilization
  • Pan range: continuous 360° AZ rotation
  • Tilt range: +/-90° elevation movement, including stow position
  • Colour: Snow White glossy. Custom on request

SYSTEM INTERFACE

  • Video format: HD-SDI convertible to HDMI or DVI
  • Video streaming: H.264 in HD
  • Data: RS422 or RS232 (NMEA0183), Ethernet for control

ENVIRONMENTAL

  • Ingress Protection Mark: IP67
  • Built to: MIL-STD 461 & MIL-STD 810 with MIL SPEC connectors
  • Operational temperature: -20⁰C to +50⁰C

WEIGHT AND DIMENSIONS

  • Weight: ~ 11 kg (~24 lbs.)
  • Diameter payload: 292mm (11.4 in)3
  • Height payload: 368mm (14.4 in)3

POWER REQUIREMENTS

  • Voltage: 20 to 34 VDC
  • Power: 100W based on configuration

Find Out More

Get in touch with us to discuss your imaging needs in more detail.